- Database
- Experimentalists
- Date
- 2021-01-01
- Provider
- IPAG
- Thickness
- 0.8 $\pm$ 0.1 $mm$
- Diameter
- 13.0 $mm$
- Mass
- 0.301 $\pm$ 0.0015 $g$
- Substrate material
- sample holder in aluminum with a centered hole to hold the sample
- Comments
- KBr pellet of 13mm of diameter and 0.8mm thick
- Temperature
- 22.0 $\pm$ 2.0 $^{\circ}C$
- Temperature max
- 22.0 $\pm$ 2.0 $^{\circ}C$
- Type
- vacuum
- Fluid pressure
- 0.001 $mbar$
- Comments
- stored in a desiccator
- Number
- 1
- Layers
-
- MIL090001 pellet , 0.8 $mm$
- Title
- Grinding of the MIL090001 matter, mixing with KBr, pellet making
- Matters
- Sample
- MIL090001 KBr Pellet
- Processing steps
-
Step Chronology Date Type Process Changes #1 before layer formation 2021-01-01 mechanical grinding bulk meteorite (20-30 mg) reduced to grains with size lower than 10 microns #2 before layer formation 2021-01-01 chemical chemical leaching to remove minerals related to terrestrial weathering bulk meteorite (10mg) cleaned from terrestrial weathering products - see Krämer Ruggiu et al. (2021) for details on the chemical protocol #3 before layer formation 2021-01-01 thermal 300 mg of commercial ultrapure KBr powder was heated under ambient air to 80°C overnight (~10h) removal of adsorbed/hydration water in KBr powder #4 before layer formation 2021-01-01 mixing homogeneous mixing 1.0 mg of grinded meteorite was weighed and mixed with 300 mg of dried commercial ultrapure KBr powder #5 during layer formation 2021-01-01 pressure pressure formation of a pellet of 13mm diameter and 0.8 mm thick under 400 bars of pressure